Monday, August 13, 2012

How to use photomatix for HDR processing with video


This is the color effect, post processed from photomatix, and then into photoshop cs3, watch the video below to see how!
This is the same picture, with the post processing taken one step further into Lightroom. Watch the video below to see how!

Tuesday, August 7, 2012

Alien Bee 1600 alien green

This is my Alien Bee B1600 with attached silver reflector (comes standard with unit). The hole in the reflector is made for inserting an umbrella and the black screw on top is for loosening/tightening the umbrella, and adjusting umbrella length for different creative effects.

Archway

HDR (High Dynamic Range

This was taken without a light, and using one RAW file (.NEF). I post processed first with photomatix, which is simply the best hdr post processing software out there, and I gave it a little extra pop in photoshop cs3. I'm currently working on an HDR tutorial if anyone is interested.


Monday, August 6, 2012

Brittni on location, Yorktown

Brittni on location in Yorktown!

We arrived at the shoot with 2 Alien Bee's lights (AB1600 alien green version and the AB800 black version), a Vagabond mini power pack, one 10ft. all purpose light stand, a softbox, a set of grid spots, and the Paul C Buff cyber commander and receiver set up...I decided to use the AB1600, but the AB800 would have been just as good for this particular shoot. If I have the choice, I always like to bring the AB1600 in case I need the extra power, the only drawback to that is, when you use a high output of power, you run your vagabond mini battery pack dead a lot faster.

I positioned the AB1600 front left, roughly 45 degrees, and attached a large softbox, and fired away. I post processed first with photoshop using some actions, specifically kubota image tools "daily multi vitamin" from Kubota Artistic Tools V2, I might have even given these the multi-vitamin twice. I then used "edge burner" from kubota, and I usually do that two or three times as well. I save the image into a "working" folder, and then load into lightroom. I really like the pre-set "aged" look, so I gave it that, and just messed with the exposure slider until I had it to my liking. I think put the image back into photoshop for a kubota image tools sloppy border, and presto!

I know this is a "no no" in photography and unconventional, but I really dig the "looking up" angles. It actually works really well on some people, and not so well on others, but with Brittni I think it worked.


I just love this wall/texture/color in the background, I've used this same spot for some engagement photos which I may post sometime soon.

I really like the look in her eyes on this one, the far off gaze makes it an interesting shot!


This particular shot was done with a 40 degree grid spot, front left, and a 250 shudder speed to blacken/darken the background, this was actually shot up against the same wall in the above pictures. I just moved the model a little closer to the light when I attached the grid spot and brought her off the wall by a few feet in order to darken the wall/background.

I positioned the AB1600 behind Brittni, and attached the grid spot for effect

This is actually a working windmill that we stumbled across, it must be new because I've never seen it out there before (Yorktown, Virginia). This is a prime example of "location scouting". Location scouting is very important. Before you do a shoot, its great to drive around and check out different locations and spots and come up with a plan, as opposed to just carrying a bunch of lights and walking around trying to find different places to shoot at. This was an AB1600 front right, bare bulb with attached standard silver reflector that comes with the AB1600. I was able to change my shutter speed to a faster shutter to get a really cool color of sky blue.


I just wanted to try something different so I ran these through the antique look in the Lightroom pre-sets, I really liked the sky.




This is the setup with the grid spot on the AB1600 and you can see the vagabond mini on the ground which the light is plugging into. What you see hanging is the CSRB+ receiver. Notice the texture and color of the wall.
Another setup shot

more of the same

Add caption

This is the setup at the windmill location

While we were set up at the location, the gentleman that runs the place (I'm assuming he's the curator) told us we were on private property. This property is owned by the Watermans Museum. He said it's ok to have photo shoots there, he just wants us to call or stop by first. He then told us about a previous photoshoot there in which a Victorias Secret model was used, and he was able to watch her in some nude and half nude shots, which he was really excited and happy about. He let us into the windmill and showed us the architecture and engineering marvels, and he spun the contraption around a few times to show us that its working. All in all, it made for a fun day, can't wait to go back to this location. (Yorktown Beach, Yorktown, Virginia , beside Watermans Museum under the Coleman Bridge)




See No Evil, Hear No Evil, Speak No Evil

Laura doing themed photography in the studio!

Laura wanted to do a themed shoot, and being the professional that she is, I think we pulled it off pretty well. I used an Alien Bee front right, roughly 45 degrees, with two AB800's, bare bulb,  blowing out the white backdrop


Stay Drug Free

Laura wanted me to work with her on a personal "stay drug free" campaign!


 

Laura in studio

Laura stopped by the studio!

Kendra in studio

Kendra came in from Florida and was a perfect model to work with! She had a diverse selection of outfits and there was no need to give her alot of direction, she seemed like a well seasoned model!








 

Hair Flippin' Tutorial

Kendra and Laura were available for some hair flippin'!!!

This setup is easy to do, great for beginner photographers/models, give it a try and you'll get a few great images for your portfolio:

This was shot with a 3 point lighting setup, Alien Bee's 1600 in a softbox front right (45 degrees), and 2 Alien Bee's 800's bare bulb blowing out the white backdrop. I used a white tile board from Home Depot to get somewhat of a reflection on Laura's heels.

I simply had each model put her head down while I counted to 3 and then she would lift her head and flip her hair at the same time that I would snap the photo. It took 3 or 4 frames to get one that I really liked, but the setup is easy to try and the results are pretty good!